|
| |
 |
| |
 Always
remember that your Dzigner
Door will be with you for a very long time
and we advise that you make sure that the purchase
is from a reputable company that guarantees after
sales service.
It is advisable to get Dzigner
Doors to regularly (every 18 months) to
service your doors and retention springs. And a
major service is advisable 5 years after installation.
Dzigner
Doors are not only extremely attractive,
safe and convenient, they are highly durable as
well. Covered in a low maintenance, brush-on application,
these doors cope very well in adverse weather
conditions of hot and cold extremes. This is available
from Dzigner
Doors or any reputable hardware store,
when it becomes necessary to maintain your door. |
| |
| Service Indicators |
| |
The door does not operate freely.- The door is noisy.
- The door does not sit square
in the opening.
- The lock does not operate properly.
(manual)
- The Door does not stay up in
the open position, it drops down on it’s
own. (manual)
- The door is heavy to lift manually.
- The motor is noisy in operation.
- The motor runs but does not lift
up the door.
|
| |
|
| |
| The Door |
| |
- Regularly treat your door panels
with the prescribed wax based oil according
to instructions found on the inside of the door
– DO NOT USE VARNISH.
- The metal operating parts, i.e.
springs, rollers, hinges and cables, must be
lubricated once every six months.
- Allow Dzigner
Services to carry out a professional
mini service on your door at least every 18
months. Keeping the springs at the correct tension
will extend the lifespan of the door.
- A major service should be done
by Dzigner
Services after approximately 3-5 years
to replace all the metal working parts, i.e.
springs, cable, pulleys, etc.
|
| |
| Remember – there is nothing
worse than to be stuck inside or outside your garage! |
| |
| Automation |
- Ensure that you know how to
disengage and re-engage the motor when a power
failure occurs.
- Twice a year clean and lubricate
the shaft of the motor with the recommended
aircraft grease.
- It is advisable to fit a “lightning
and voltage surge protection kit” to plug
the motor into to protect the P.C. board.
- When in doubt call Dzigner
Services and we will help out.
|
| |
|
| |
| |
|
|
|
|
